We provide and export START LATEX & FACADE to Arabian countries daily. Express shipping is available.
Persian Gulf Trading Co.
We export & import all kind of product from Iran.
We do customs clearance works.
Importing from Iran.
Export of Goods to Iran.
Clearance goods from office of customs and deliver to the destination in Iran.
We do all the steps of customs clearance in the fastest time.
We export all kind of fresh vegetables, Food & Beverage and many other product to Arabian countries daily.
Located: Bandar Abbas.
القيام بكافة الأمور المتعلقة باستيراد وتصدير البضائع من إيران
القيام بالشؤون الجمركية وتخليص البضائع
الاستيراد إلى إيران
تصدير من إيران
تخليص البضائع وتسليمها إلى الوجهة في إيران
القيام بجميع أعمال الجمارك في أقصر وقت
تصدير الخضروات والفواكه والأغذية والمشروبات إلى الدول العربية بشكل يومي
تصدير جميع أنواع السجاد والكافيار والزعفران والمنتجات البترولية
START LATEX & FACADE
Water-based Wall Sealer is recommended to be applied prior to painting. This product covers surface’s cracks and crazing and offers better adhesiveness that increases the coverage and durability of the final coat.
|Technical Specifications (for white color) at 25°C|
|Theoretical Coverage||8 – 10 m2 / Lit Dry film 50 micron 15-17 m2 / Lit Dry film 30 micron|
|Recommended for||This sealer is recommended to be used on all masonry surfaces such as plaster, concrete, bricks, cement composition panels and wood surfaces.|
|key benefits||Excellent alkaline resistance , Good adhesion on masonry substrates that increases better surface coverage for the final coat and decreases paint consumption, quick dry time, ease of applying, water-dilutable, environmentally friendly, free of unpleasant odor.|
|Surface Preparation||Surface should be clean, dry and free from contamination, rust, dust and grease. Large cracks and holes must be cured with crack repairing materials before applying the sealer. Remove old and flaking paint to achieve a smooth surface. Sand the surface if needed.|
|Application methods||Brush, Roll, Spray Gun|
|How to Apply||1- This sealer is ready to apply.
2- In case of filling up cracks with putty, the area should be re-coated with this sealer.
3- Re-coating time is 3 Hours (Minimum)
4- The recommended temperature for applying this product is above 10⁰ C, surface temperature of 3⁰ above the dew point and humidity less than 80%
|Cleaning Up||Clean your hands and the spilled paint on the ground with warm water and soap after painting. In order to prevent rust reaching the painting tools wash and clean with white spirit and dry the tools immediately after painting. Follow the safety instructions of the white spirit`s manufacturer.|
|Safety & Storage Recommendations||Store this product in a cool, dry place and away from direct sunlight. Tighten the sealer container lid. This product must be protected from frost. It is recommended to use this product within 24 months from the production date. Ensure good ventilation during application. Keep out of reach of children. Avoid contact with skin. When painting, it is advisable to wear eye protection. In case of contact with eyes, rinse immediately with plenty of water. If swallowed get medical attention.|
- Color : Based on Request, Multi Color
- Packaging : Based on Customer Request
- Port : Bandar Abbas / Iran
- Type : Paint
- Place of Origin : Iran
- Grade : A+++ / Permium