shild
  • 2020/07/31 12:32 pm
  • Iran
On Call

We provide and export SHIELD, Alkyd Anti-Corrosion Primer (Anti-Rust) to Arabian countries daily. Express shipping is available.

نحن نوفر ونصدر دهان أكريليك فضي معدني مقاوم للحرارة يومياً للدول العربية. الشحن السريع متاح.

Persian Gulf Trading Co.

We export & import all kind of product from Iran.
We do customs clearance works.
Importing from Iran.
Export of Goods to Iran.
Clearance goods from office of customs and deliver to the destination in Iran.
We do all the steps of customs clearance in the fastest time.
We export all kind of fresh vegetables, Food & Beverage and many other product to Arabian countries daily.

Located: Bandar Abbas.
Whatsapp:+989177638678

القيام بكافة الأمور المتعلقة باستيراد وتصدير البضائع من إيران
القيام بالشؤون الجمركية وتخليص البضائع
الاستيراد إلى إيران
تصدير من إيران
تخليص البضائع وتسليمها إلى الوجهة في إيران
القيام بجميع أعمال الجمارك في أقصر وقت
تصدير الخضروات والفواكه والأغذية والمشروبات إلى الدول العربية بشكل يومي
تصدير جميع أنواع السجاد والكافيار والزعفران والمنتجات البترولية

الموقع: بندرعباس

SHIELD, Alkyd Anti-Corrosion Primer (Anti-Rust)

SHIELD, Alkyd Anti-Corrosion Primer is made from the best quality Alkyd resin and high-performance anti-corrosive pigments. This primer is intended to be applied as the first coat (primer) on prepared metal surfaces.

Technical Specifications (for white color) at 25°Cْ
Theoretical coverage (Dry Film of 50 µ)9-11 m²/ Lit for all the following Product Codes: ALCO-2020, ALCO-2003, ALCO-2002, ALCO-2034 & ALCO-2014
Touch dry timeMax. 4 Hour
Recoating timeMin. 16 Hours
Flash point38⁰C
Information
Recommended forSHIELD, Alkyd Anti-Corrosion Primer is recommended for interior and exterior use, on all metal, wood, plaster, cement, brick and cement composition panel surfaces and small industrial usages.
Key BenefitsSuitable dry time, easy to apply, excellent adhesion, excellent coverage, environment friendly are the advantages of this product. It also shows a good resistance against atmospheric elements.
Surface preparationSurface must be clean from contamination, any rust, dust and grease. Remove any old and flaking paint from the surface to achieve a smooth surface. Sand the surface if needed.
Application methodsBrush, Roller, Spray
How to ApplyDilute, SHIELD, Alkyd Anti-Corrosion Primer with adequate amount of white spirit and apply it on surface. Amount of diluting is depending on environment temperature, the substrate and applying methods. In a normal condition the diluting rate for applying by brush is 12 to 15%, with roller is 10 to 12% and with sprayer is 15 to 20%. The recommended temperature for applying and painting this product is above 10⁰ C, surface temperature of 3⁰ above the dew point and humidity less than 80%.
ThinnerWhite Spirit
Cleaning UpClean hands and painting tools and any spilled paint on the ground after use with white spirit thinner and dry immediately. Follow the safety instructions of white spirit`s thinner manufacturer.
Safety & Storage RecommendationsKeep the can in dry, cool place and away from direct sunlight. Tighten the can lid. It is recommended to use this product within 30 months from the production date. Ensure good ventilation during application. When painting, it is advisable to wear eye protection. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water. If swallowed seek medical advice.

Overview

  • Color : Red
  • Port : Bandar Abbas / Iran
  • Type : Anti-Rust
  • Place of Origin : Iran
  • Grade : A+++ / Permium

Leave a Review